Detailed Product Description

Quick mould changeThis mould change system offers the following advantages : limited idle time of the moulding machine due to mold change operation preparation of moulds in the workshop economical producition of small series of mouldings reduction of stock improvement of delivery schedules machine down time only 30~60 minutes (dependant on machine type) Mould filling system These pressure vessels can withstand an internal pressure of up to 6 bar and have 16 to 24 fast connectors for filling guns. A level sensor controls the material level. According to demand the machine may have pressure vessels as from 200 up to 400 liters of volume.electronical pressure regulation optimum regulation in the low pressure range savings in cycle time homogenious material distribution in mouldingsFilling guns and ejectorsThe filling guns have good function to fill preexpanded beads into the mould. The filling guns have also long performance with good packings and rings. Control touch panel Operators can change operation conditions on the touch screen in accordance with molded products. All operation conditions are shown on the screen. Control unit offers the following : parameter settings according to process operating convenience short reaction period memorizing mould data individual process settings Control system Process relevant pressures (steam/compressed air) are governed by regulators. The fast reaction of the regulators guarantees a reproduction of set values even at fluctuating pre pressures. The control system offers the following : saving of energy fast acting regulators exact regulation of adjusted values Hydraulic system A direct acting hydraulic system, operating partially in stop and go mode, cares for a clamping force of up to 1.6 bar internal pressure. As a preventive feature of the hydraulic system the clamping force is determined by the inner pressure by an electronic program. Steam chamber system Steam chamber extension frames are mounted in the back of the stationary chamber. Thus deeper mouldings are possible without reducing the opening of the machine. Steam chamber system offers the following advantages: energy saving fast mould changing operation moulds interchangeable steam chamber extensions without stroke reduction